Karl D Dearn
Karl D Dearn
Department of Mechanical Engineering, University of Birmingham
Verified email at bham.ac.uk - Homepage
TitleCited byYear
Combustion characteristics and emissions of Fischer–Tropsch diesel fuels in IC engines
SS Gill, A Tsolakis, KD Dearn, J Rodríguez-Fernández
Progress in Energy and Combustion Science 37 (4), 503-523, 2011
1932011
The effect of the addition of individual methyl esters on the combustion and emissions of ethanol and butanol-diesel blends
E Sukjit, JM Herreros, KD Dearn, R García-Contreras, A Tsolakis
Energy, 2012
932012
The role of soot particles in the tribological behavior of engine lubricating oils
E Hu, X Hu, T Liu, L Fang, KD Dearn, H Xu
Wear 304 (1-2), 152-161, 2013
692013
The wear of PEEK in rolling–sliding contact–Simulation of polymer gear applications
T Hoskins, K Dearn, YK Chen, S Kukureka
Wear 309, 35-42, 2014
482014
Enhancing the lubricity of an environmentally friendly Swedish diesel fuel MK1
E Sukjit, KD Dearn
Wear 271 (9-10), 1772-1777, 2011
462011
Synergistic lubricating behaviors of graphene and MoS2 dispersed in esterified bio-oil for steel/steel contact
Y Xu, Y Peng, KD Dearn, X Zheng, L Yao, X Hu
Wear 342, 297-309, 2015
442015
Acoustic noise from polymer gears–A tribological investigation
TJ Hoskins, KD Dearn, SN Kukureka, D Walton
Materials & Design 32 (6), 3509-3515, 2011
422011
Effect of hydrogen on butanol–biodiesel blends in compression ignition engines
E Sukjit, JM Herreros, KD Dearn, A Tsolakis, K Theinnoi
International journal of hydrogen energy 38 (3), 1624-1635, 2013
402013
Finding synergies in fuels properties for the design of renewable fuels–hydroxylated biodiesel effects on butanol-diesel blends
E Sukjit, JM Herreros, J Piaszyk, KD Dearn, A Tsolakis
Environmental science & technology 47 (7), 3535-3542, 2013
322013
A tribological assessment of a PEEK based self-mating total cervical disc replacement
H Xin, DET Shepherd, KD Dearn
Wear 303 (1), 473-479, 2013
302013
Applications of dry film lubricants for polymer gears
KD Dearn, TJ Hoskins, DG Petrov, SC Reynolds, R Banks
Wear 298, 99-108, 2013
292013
On the fundamental lubricity of 2, 5-dimethylfuran as a synthetic engine fuel
E Hu, X Hu, X Wang, Y Xu, KD Dearn, H Xu
Tribology International 55, 119-125, 2012
282012
Effect of fuel injector deposit on spray characteristics, gaseous emissions and particulate matter in a gasoline direct injection engine
C Jiang, H Xu, D Srivastava, X Ma, K Dearn, R Cracknell, ...
Applied energy 203, 390-402, 2017
252017
A kinematic analysis of meshing polymer gear teeth
M Karimpour, KD Dearn, D Walton
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2010
242010
Effect of catalytic esterification on the friction and wear performance of bio-oil
Y Xu, X Zheng, X Hu, KD Dearn, H Xu
Wear 311 (1), 93-100, 2014
232014
Fabrication and tribological characterization of laser textured boron cast iron surfaces
Y Xu, Y Peng, KD Dearn, T You, J Geng, X Hu
Surface and Coatings Technology 313, 391-401, 2017
202017
Tribological assessment of coated piston ring-cylinder liner contacts under bio-oil lubricated conditions
Y Peng, Y Xu, J Geng, KD Dearn, X Hu
Tribology International 107, 283-293, 2017
162017
Friction-induced transformation from graphite dispersed in esterified bio-oil to graphene
Y Xu, J Geng, X Zheng, KD Dearn, X Hu
Tribology Letters 63 (2), 18, 2016
162016
Synthesis and tribological studies of nanoparticle additives for pyrolysis bio-oil formulated as a diesel fuel
Y Xu, Y Peng, X Zheng, KD Dearn, H Xu, X Hu
Energy 83, 80-88, 2015
162015
An investigation into the characteristics of DISI injector deposits using advanced analytical methods
K Dearn, J Xu, H Ding, H Xu, A Weall, P Kirkby, B Cooper, I Edington, ...
SAE International Journal of Fuels and Lubricants 7 (3), 771-782, 2014
162014
The system can't perform the operation now. Try again later.
Articles 1–20