| The effect of the addition of individual methyl esters on the combustion and emissions of ethanol and butanol-diesel blends E Sukjit, JM Herreros, KD Dearn, R García-Contreras, A Tsolakis Energy 42 (1), 364-374, 2012 | 151 | 2012 |
| Effect of hydrogen on butanol–biodiesel blends in compression ignition engines E Sukjit, JM Herreros, KD Dearn, A Tsolakis, K Theinnoi International journal of hydrogen energy 38 (3), 1624-1635, 2013 | 81 | 2013 |
| Enhancing the lubricity of an environmentally friendly Swedish diesel fuel MK1 E Sukjit, KD Dearn Wear 271 (9-10), 1772-1777, 2011 | 70 | 2011 |
| Finding synergies in fuels properties for the design of renewable fuels–Hydroxylated biodiesel effects on butanol-diesel blends E Sukjit, JM Herreros, J Piaszyk, KD Dearn, A Tsolakis Environmental science & technology 47 (7), 3535-3542, 2013 | 64 | 2013 |
| Effect of ambient humidity and hygroscopy on the lubricity of diesel fuels M Lapuerta, J Sánchez-Valdepeñas, E Sukjit Wear 309 (1-2), 200-207, 2014 | 55 | 2014 |
| Effect of fatty acid composition of methyl and ethyl esters on the lubricity at different humidities M Lapuerta, J Sánchez-Valdepeñas, D Bolonio, E Sukjit Fuel 184, 202-210, 2016 | 45 | 2016 |
| Evaluation of waste plastic oil-biodiesel blends as alternative fuels for diesel engines C Kaewbuddee, E Sukjit, J Srisertpol, S Maithomklang, K Wathakit, ... Energies 13 (11), 2823, 2020 | 43 | 2020 |
| Blending lignin-derived oxygenate in enhanced multi-component diesel fuel for improved emissions JM Herreros, A Jones, E Sukjit, A Tsolakis Applied energy 116, 58-65, 2014 | 43 | 2014 |
| Extending the environmental benefits of ethanol–diesel blends through DGE incorporation JM Herreros, K Schroer, E Sukjit, A Tsolakis Applied Energy 146, 335-343, 2015 | 40 | 2015 |
| Characterization and impact of waste plastic oil in a variable compression ratio diesel engine K Wathakit, E Sukjit, C Kaewbuddee, S Maithomklang, N Klinkaew, ... Energies 14 (8), 2230, 2021 | 38 | 2021 |
| Distilled waste plastic oil as fuel for a diesel engine: fuel production, combustion characteristics, and exhaust gas emissions W Arjharn, P Liplap, S Maithomklang, K Thammakul, S Chuepeng, ... ACS omega 7 (11), 9720-9729, 2022 | 35 | 2022 |
| Improvement of the tribological behaviour of palm biodiesel via partial hydrogenation of unsaturated fatty acid methyl esters E Sukjit, M Tongroon, N Chollacoop, Y Yoshimura, P Poapongsakorn, ... Wear 426, 813-818, 2019 | 33 | 2019 |
| Investigation of the lubrication properties and tribological mechanisms of oxygenated compounds E Sukjit, P Poapongsakorn, KD Dearn, M Lapuerta, ... Wear 376, 836-842, 2017 | 28 | 2017 |
| Experimental investigation on a DI diesel engine using waste plastic oil blended with oxygenated fuels E Sukjit, P Liplap, S Maithomklang, W Arjharn SAE Technical Paper, 2017 | 23 | 2017 |
| Catalytic oxidation of diesel particulate matter by using silver and ceria supported on alumina as the oxidation catalyst B Sawatmongkhon, K Theinnoi, T Wongchang, C Haoharn, ... Applied Catalysis A: General 574, 33-40, 2019 | 22 | 2019 |
| Interrogating the surface: The effect of blended diesel fuels on lubricity E Sukjit, KD Dearn, A Tsolakis SAE International Journal of Fuels and Lubricants 5 (1), 154-162, 2012 | 18 | 2012 |
| Utilizing waste plastic bottle-based pyrolysis oil as an alternative fuel S Maithomklang, K Wathakit, E Sukjit, B Sawatmongkhon, J Srisertpol ACS omega 7 (24), 20542-20555, 2022 | 13 | 2022 |
| Improving ethanol-diesel blend through the use of hydroxylated biodiesel E Sukjit, JM Herreros, K Dearn, A Tsolakis SAE Technical Paper, 2014 | 12 | 2014 |
| Prediction of the influence of castor oil–ethanol–diesel blends on single-cylinder diesel engine characteristics using generalized regression neural networks (GRNNs) P Aengchuan, A Wiangkham, N Klinkaew, K Theinnoi, E Sukjit Energy Reports 8, 38-47, 2022 | 11 | 2022 |
| Modeling of Hydrogen Production from Catalytic Partial Oxidation of Ethanol over a Platinum–Rhodium-Supported Catalyst B Sawatmongkhon, K Theinnoi, T Wongchang, C Haoharn, ... Energy & Fuels 35 (5), 4404-4417, 2021 | 11 | 2021 |
Karl D DearnProfessor of Mechanical Engineering, Department of Mechanical Engineering, University of BirminghamVerified email at bham.ac.uk
