| Formal calibration methodology for CFD models of naturally ventilated indoor environments M Hajdukiewicz, M Geron, MM Keane Building and Environment 59, 290-302, 2013 | 110 | 2013 |
| Calibrated CFD simulation to evaluate thermal comfort in a highly-glazed naturally ventilated room M Hajdukiewicz, M Geron, MM Keane Building and Environment 70, 73-89, 2013 | 102 | 2013 |
| Performance of biochar as a catalyst for tar steam reforming: Effect of the porous structure D Buentello-Montoya, X Zhang, J Li, V Ranade, S Marques, M Geron Applied energy 259, 114176, 2020 | 101 | 2020 |
| Natural convection experiments on a heated horizontal cylinder in a differentially heated square cavity C Butler, D Newport, M Geron Experimental Thermal and Fluid Science 44, 199-208, 2013 | 52 | 2013 |
| Combination of CFD and DOE to analyse solid particle erosion in elbows P Frawley, J Corish, A Niven, M Geron International Journal of Computational Fluid Dynamics 23 (5), 411-426, 2009 | 36 | 2009 |
| Flowfield analysis of a linear clustered plug nozzle with round-to-square modules M Geron, R Paciorri, F Nasuti, F Sabetta Aerospace Science and Technology 11 (2-3), 110-118, 2007 | 25 | 2007 |
| Comparison of Lagrangian and Eulerian simulations of slurry flows in a sudden expansion P Frawley, AP O’Mahony, M Geron | 22 | 2010 |
| Investigation of competitive tar reforming using activated char as catalyst D Buentello-Montoya, X Zhang, S Marques, M Geron Energy Procedia 158, 828-835, 2019 | 18 | 2019 |
| Development and validation of a compact thermal model for an aircraft compartment M Geron, C Butler, J Stafford, D Newport Applied thermal engineering 61 (2), 65-74, 2013 | 18 | 2013 |
| Optimising the locations of thermally sensitive equipment in an aircraft crown compartment C Butler, D Newport, M Geron Aerospace Science and Technology 28 (1), 391-400, 2013 | 17 | 2013 |
| Automatic extraction of reduced-order models from CFD simulations for building energy modelling DT Mullen, MM Keane, M Geron, RFD Monaghan Energy and Buildings 99, 313-326, 2015 | 16 | 2015 |
| Design and testing of a transonic linear cascade tunnel with optimized slotted walls A Rona, R Paciorri, M Geron | 13 | 2006 |
| A computational toolchain for the automatic generation of multiple Reduced-Order Models from CFD simulations T Marzullo, MM Keane, M Geron, RFD Monaghan Energy 180, 511-519, 2019 | 10 | 2019 |
| Three dimensional features of clustered plug nozzle flows F Nasuti, M Geron, R Paciorri 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 4910, 2003 | 10 | 2003 |
| Numerical and experimental investigation of a radially reduced diffuser design concept for a centrifugal compressor performance at design point L McLaughlin, S Spence, D Rusch, L Galloway, M Geron, KK So, ... Aerospace Science and Technology 126, 107590, 2022 | 9 | 2022 |
| Wall interference in the discharge flow in a linear cascade wind tunnel A Rona, J Gostelow, R Paciorri, M Geron 41st Aerospace Sciences Meeting and Exhibit, 455, 2003 | 9 | 2003 |
| Combination of CFD and DOE to analyze and improve the mass flow rate in urinary catheters P Frawley, M Geron | 7 | 2009 |
| Performance improvement of a mixed flow turbine using 3D blading M Elliott, S Spence, M Seiler, M Geron Turbo Expo: Power for Land, Sea, and Air 84102, V02ET39A030, 2020 | 6 | 2020 |
| Performance Analysis of an Infinite Array Linear Clusterd Plug Nozzle M Geron, R Paciorri, F Nasuti, F Sabetta Journal of propulsion and power 23 (1), 246-249, 2007 | 6 | 2007 |
| Transition between open and closed wake in 3D linear aerospike nozzles M Geron, R Paciorri, F Nasuti, F Sabetta, E Martelli 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 4308, 2005 | 6 | 2005 |
