Effect of building directions on the surface roughness, microstructure, and tribological properties of selective laser melted Inconel 625 X Yan, S Gao, C Chang, J Huang, K Khanlari, D Dong, W Ma, ... Journal of Materials Processing Technology 288, 116878, 2021 | 64 | 2021 |
60NiTi: a review of recent research findings, potential for structural and mechanical applications, and areas of continued investigations K Khanlari, M Ramezani, P Kelly Transactions of the Indian Institute of Metals 71, 781-799, 2018 | 54 | 2018 |
Mechanical and microstructural characteristics of as-sintered and solutionized porous 60NiTi K Khanlari, M Ramezani, P Kelly, P Cao, T Neitzert Intermetallics 100, 32-43, 2018 | 39 | 2018 |
Reciprocating sliding wear behavior of 60NiTi as compared to 440C steel under lubricated and unlubricated conditions K Khanlari, M Ramezani, P Kelly, P Cao, T Neitzert Tribology Transactions 61 (6), 991-1002, 2018 | 36 | 2018 |
Comparison of the reciprocating sliding wear of 58Ni39Ti-3Hf alloy and baseline 60NiTi K Khanlari, M Ramezani, P Kelly, P Cao, T Neitzert Wear 408, 120-130, 2018 | 30 | 2018 |
Additive manufacturing of a Co-Cr-W alloy by selective laser melting: In-situ oxidation, precipitation and the corresponding strengthening effects K Li, Z Wang, K Song, K Khanlari, XS Yang, Q Shi, X Liu, X Mao Journal of Materials Science & Technology 125, 171-181, 2022 | 22 | 2022 |
Fabrication of spherical WC-Co powders by radio frequency inductively coupled plasma and a consequent heat treatment Z Yan, M Xiao, X Mao, K Khanlari, Q Shi, X Liu Powder Technology 385, 160-169, 2021 | 21 | 2021 |
Effects of printing volumetric energy densities and post-processing treatments on the microstructural properties, phase transformation temperatures and hardness of near … K Khanlari, Q Shi, K Li, K Hu, P Cao, X Liu Intermetallics 131, 107088, 2021 | 20 | 2021 |
Preparation of Ni–Ti composite powder using radio frequency plasma spheroidization and its laser powder bed fusion densification Q Shi, Y Zhang, C Tan, X Mao, K Khanlari, X Liu Intermetallics 136, 107273, 2021 | 17 | 2021 |
Effects of powder size distribution on the microstructural and mechanical properties of a Co–Cr–W–Si alloy fabricated by selective laser melting K Li, X Mao, K Khanlari, K Song, Q Shi, X Liu Journal of Alloys and Compounds 825, 153973, 2020 | 15 | 2020 |
An investigation on reasons causing inferiority in unlubricated sliding wear performance of 60NiTi as compared to 440C steel K Khanlari, M Ramezani, P Kelly, P Cao, T Neitzert Tribology Transactions 62 (1), 96-109, 2019 | 14 | 2019 |
Dual-structured oxide coatings with enhanced wear and corrosion resistance prepared by plasma electrolytic oxidation on Ti-Nb-Ta-Zr-Hf high-entropy alloy G Zhang, K Khanlari, S Huang, X Li, D Zhao, H Wu, Y Cao, B Liu, ... Surface and Coatings Technology 456, 129254, 2023 | 13 | 2023 |
Printing of NiTinol parts with characteristics respecting the general microstructural, compositional and mechanical requirements of bone replacement implants K Khanlari, Q Shi, X Yan, K Hu, C Tan, P Kelly, W Zhang, P Cao, X Wang, ... Materials Science and Engineering: A 839, 142839, 2022 | 13 | 2022 |
An investigation into the possibility to eliminate the microstructural defects of parts printed using a Ni-rich Ni-Ti elemental powder mixture K Khanlari, Q Shi, K Li, P Xu, P Cao, X Liu Materials Research Express 7 (10), 106503, 2020 | 10 | 2020 |
Synthesis of As-sintered 60NiTi parts with a high open porosity level K Khanlari, M Ramezani, P Kelly, P Cao, T Neitzert Materials Research 21, e20180088, 2018 | 10 | 2018 |
An investigation on microstructural and mechanical properties of porous 60NiTi parts solutionized by different cost-effective methods K Khanlari, M Ramezani, P Kelly, M Hayat, P Cao, T Neitzert Metallography, Microstructure, and Analysis 7, 334-346, 2018 | 9 | 2018 |
Enhanced hardness and toughness in WC/W2C-Ni-Cu composites fabricated by selective laser melting C Tan, J Hu, Q Shi, K Khanlari, H Xie, X Liu International Journal of Refractory Metals and Hard Materials 105, 105805, 2022 | 8 | 2022 |
Effect of hafnium addition in 60NiTi alloy hardened under open atmosphere conditions K Khanlari, M Ramezani, P Kelly, T Neitzert Metallography, Microstructure, and Analysis 7, 476-486, 2018 | 8 | 2018 |
Microstructural and mechanical properties of Porous 60NiTi prepared by conventional press-and-sintered method K Khanlari, M Ramezani, M Hayat, K Piaras, P Cao, T Neitzert 2nd International conference on materials science and nanotechnology (ICMSNT …, 2017 | 7 | 2017 |
A study on the possibility to process dense 60NiTi from elementally blended Ni and Ti powders K Khanlari, Q Shi, K Hu, Z Yan, P Kelly, P Cao, X Liu Vacuum 192, 110500, 2021 | 6 | 2021 |