Gorazd Fajdiga
Gorazd Fajdiga
Unknown affiliation
Verified email at bf.uni-lj.si
TitleCited byYear
Fatigue crack initiation and propagation under cyclic contact loading
G Fajdiga, M Sraml
Engineering Fracture Mechanics 76 (9), 1320-1335, 2009
982009
Numerical simulation of surface pitting due to contact loading
J Flašker, G Fajdiga, S Glodež, TK Hellen
International journal of fatigue 23 (7), 599-605, 2001
682001
Pitting formation due to surface and subsurface initiated fatigue crack growth in contacting mechanical elements
G Fajdiga, S Glodež, J Kramar
Wear 262 (9-10), 1217-1224, 2007
512007
Surface initiated crack growth simulation in moving lubricated contact
Z Ren, S Glodez, G Fajdiga, M Ulbin
Theoretical and applied fracture mechanics 38 (2), 141-149, 2002
282002
The influence of different parameters on surface pitting of contacting mechanical elements
G Fajdiga, J Flašker, S Glodež
Engineering fracture mechanics 71 (4-6), 747-758, 2004
242004
Numerical modelling of micro‐pitting of gear teeth flanks
G Fajdiga, J Flašker, S Glodež, TK Hellen
Fatigue & fracture of engineering materials & structures 26 (12), 1135-1143, 2003
242003
Comparison of virtual crack extension and strain energy density methods applied to contact surface crack growth
G Fajdiga, Z Ren, J Kramar
Engineering Fracture Mechanics 74 (17), 2721-2734, 2007
232007
Computational modelling of the surface fatigue crack growth on gear teeth flanks
S Glodež, Z Ren, G Fajdiga
Communications in numerical methods in engineering 17 (8), 529-541, 2001
182001
Numerical methods for TMF cycle modeling
H Zaletelj, G Fajdiga, M Nagode
Strojniški vestnik-Journal of Mechanical Engineering 57 (6), 485-494, 2011
112011
Active vibration control of circular saw blades
B Gospodarič, B Bučar, G Fajdiga
European journal of wood and wood products 73 (2), 151-158, 2015
102015
COMPUTATIONAL FATIGUE ANALYSIS OF CONTACTING MECHANICAL ELEMENTS.
G Fajdiga
Tehnicki vjesnik/Technical Gazette 22 (1), 2015
102015
High cycle fatigue of welded joints with aging influence
H Zaletelj, V Haesen, L Dedene, G Fajdiga, M Nagode
Materials & Design 45, 190-197, 2013
102013
Determining a kink angle of a crack in mixed mode fracture using maximum energy release rate, SED and MTS criteria
G Fajdiga, B Zafošnik
stress 1, 1, 2015
82015
Low cycle fatigue of welded joints with aging influence
H Zaletelj, G Fajdiga, M Nagode
Materials Science and Engineering: A 564, 478-484, 2013
82013
Numerical simulation of the surface fatigue crack growth on gear teeth flanks
G Fajdiga, J Flasker, S Glodez, Z Ren
Strojniski vestnik-Journal of Mechanical Engineering 46 (6), 359-369, 2000
82000
Hygro-mechanical behavior of thermally treated beech subjected to compression loads
A Straže, G Fajdiga, S Pervan, Ž Gorišek
Construction and Building Materials 113, 28-33, 2016
52016
Analysis of the surface fatigue crack growth on gear teeth flanks under EHD lubrication conditions
G Fajdiga
PhD thesis, University of Maribor, 2001
52001
Jermenska gonila s klinastimi jermeni
G Fajdiga, M Nagode
Univerza v Ljubljani, 0
5
Compression test of thermally-treated beech wood: experimental and numerical analysis
G Fajdiga, B Zafošnik, B Gospodarič, A Straže
BioResources 11 (1), 223-234, 2015
42015
Determining stress intensity factor KI with extrapolation method
B Zafošnik, G Fajdiga
Technical Gazette 23 (6), 1673-1678, 2016
32016
The system can't perform the operation now. Try again later.
Articles 1–20