| Investigation of parameters affecting interface strength in Al/Cu clad bimetal rod extrusion process A Khosravifard, R Ebrahimi Materials & Design 31 (1), 493-499, 2010 | 139 | 2010 |
| Ductility and formability of three high-Mn TWIP steels in quasi-static and high-speed tensile and Erichsen tests AS Hamada, A Kisko, A Khosravifard, MA Hassan, LP Karjalainen, ... Materials Science and Engineering: A 712, 255-265, 2018 | 40 | 2018 |
| High temperature deformation behavior of two as-cast high-manganese TWIP steels A Khosravifard, AS Hamada, MM Moshksar, R Ebrahimi, DA Porter, ... Materials Science and Engineering: A 582, 15-21, 2013 | 38 | 2013 |
| Corrosive wear behavior of chromium carbide coatings deposited by air plasma spraying AH Yaghtin, E Salahinejad, A Khosravifard, A Araghi, A Akhbarizadeh Ceramics International 41 (6), 7916-7920, 2015 | 34 | 2015 |
| High strain rate torsional testing of a high manganese steel: design and simulation A Khosravifard, MM Moshksar, R Ebrahimi Materials & Design (1980-2015) 52, 495-503, 2013 | 34 | 2013 |
| Processing of nanostructured metallic matrix composites by a modified accumulative roll bonding method with structural and mechanical considerations AH Yaghtin, E Salahinejad, A Khosravifard International Journal of Minerals, Metallurgy, and Materials 19, 951-956, 2012 | 29 | 2012 |
| Effect of silicon on the hot deformation behavior of microalloyed TWIP-type stainless steels A Hamada, T Juuti, A Khosravifard, A Kisko, P Karjalainen, D Porter, ... Materials & Design 154, 117-129, 2018 | 28 | 2018 |
| Physically based modeling and characterization of hot deformation behavior of twinning-induced plasticity steels bearing vanadium and niobium A Hamada, A Khosravifard, D Porter, LP Karjalainen Materials Science and Engineering: A 703, 85-96, 2017 | 24 | 2017 |
| High temperature deformation behavior of a stainless steel fiber-reinforced copper matrix composite AS Hamada, A Khosravifard, AP Kisko, E Ahmed, DA Porter Materials Science and Engineering: A 669, 469-479, 2016 | 21 | 2016 |
| Optimization of the tensile-shear strength of laser-welded lap joints of ultra-high strength abrasion resistance steel M Hietala, M Ali, A Khosravifard, M Keskitalo, A Järvenpää, A Hamada Journal of Materials Research and Technology 11, 1434-1442, 2021 | 19 | 2021 |
| A new processing route to develop nano-grained structure of a TRIP-aided austenitic stainless-steel using double reversion fast-heating annealing A Järvenpää, S Ghosh, A Khosravifard, M Jaskari, A Hamada Materials Science and Engineering: A 808, 140917, 2021 | 16 | 2021 |
| Tribochemical behavior of alumina coatings deposited by high-velocity oxy fuel spraying A Khosravifard, E Salahinejad, AH Yaghtin, A Araghi, A Akhbarizadeh Ceramics International 41 (4), 5713-5720, 2015 | 14 | 2015 |
| Three dimensional finite element study on torsion extrusion processing of 1050 aluminum alloy A Khosravifard, M Jahedi, AH Yaghtin Transactions of Nonferrous Metals Society of China 22 (11), 2771-2776, 2012 | 14 | 2012 |
| Enhancement of grain structure and mechanical properties of a high-Mn twinning-induced plasticity steel bearing Al–Si by fast-heating annealing A Khosravifard, A Hamada, A Järvenpää, P Karjalainen Materials Science and Engineering: A 795, 139949, 2020 | 8 | 2020 |
| High-Speed Erichsen Testing of Grain-Refined 301LN Austenitic Stainless Steel Processed by Double-Reversion Annealing A Hamada, A Khosravifard, S Ghosh, M Jaskari, A Järvenpää, ... Metallurgical and Materials Transactions A 53 (6), 2174-2194, 2022 | 7 | 2022 |
| Influence of high strain rates on the mechanical behavior of high-manganese steels A Khosravifard Iranian Journal of Materials Forming 1 (1), 1-10, 2014 | 7 | 2014 |
| Self-reacting friction stir welding of Al–Zn–Mg aluminum alloy NT Moghaddam, A Rabiezadeh, A Khosravifard, L Ghalandari Arabian Journal for Science and Engineering 47 (7), 9085-9098, 2022 | 6 | 2022 |
| Micromechanical analysis and finite element modelling of laser-welded 5-mm-thick dissimilar joints between 316L stainless steel and low-alloyed ultra-high-strength steel A Hamada, A Khosravifard, M Ali, S Ghosh, M Jaskari, M Hietala, ... Materials Science and Engineering: A 882, 145442, 2023 | 5 | 2023 |
| Promotion of thermomechanical processing of 2-GPa low-alloyed ultrahigh-strength steel and physically based modelling of the deformation behaviour M Ali, A Khosravifard, A Hamada, T Mattar, M Eissa, J Kömi Materials Science and Engineering: A 867, 144747, 2023 | 4 | 2023 |
| Welding of Al–Mg alloy: solid-State vs. Fusion welding techniques NT Moghaddam, A Rabiezadeh, A Khosravifard, L Ghalandari Iranian Journal of Science and Technology, Transactions of Mechanical …, 2023 | 3 | 2023 |
Atef HamadaKerttu Saalasti Institute, FMT Group, University of Oulu, FinlandVerified email at oulu.fi
