Gang Chen
Gang Chen
School of Chemical Engineering and Technology, Tianjin University
Verified email at tju.edu.cn
Title
Cited by
Cited by
Year
Applying Anand model to low-temperature sintered nanoscale silver paste chip attachment
D Yu, X Chen, G Chen, G Lu, Z Wang
Materials & Design 30 (10), 4574-4579, 2009
1232009
Prediction of stress-strain relationship with an improved Anand constitutive Model For lead-free solder Sn-3.5 Ag
X Chen, G Chen, M Sakane
IEEE Transactions on Components and Packaging Technologies 28 (1), 111-116, 2005
1132005
Ratcheting study of pressurized elbows subjected to reversed in-plane bending
X Chen, B Gao, G Chen
Journal of pressure vessel technology 128 (4), 525-532, 2006
802006
Uniaxial ratcheting behavior of 63Sn37Pb solder with loading histories and stress rates
G Chen, X Chen, CD Niu
Materials Science and Engineering: A 421 (1), 238-244, 2006
782006
Uniaxial ratcheting and low-cycle fatigue failure behaviors of AZ91D magnesium alloy under cyclic tension deformation
YC Lin, XM Chen, G Chen
Journal of Alloys and Compounds 509, 6838-6843, 2011
732011
Visco-plastic constitutive modeling on Ohno-Wang kinematic hardening rule for uniaxial ratcheting behavior of Z2CND18. 12N steel
D Yu, G Chen, W Yu, D Li, X Chen
International Journal of Plasticity 28 (1), 88-101, 2011
662011
Ratchetting and ratchetting boundary study of pressurized straight low carbon steel pipe under reversed bending
B Gao, X Chen, G Chen
International journal of pressure vessels and piping 83 (2), 96-106, 2006
662006
Transient Thermal Performance of IGBT Power Modules attached by Low-Temperature Sintered Nano-Silver
G Chen, D Han, YH Mei, X Cao, T Wang, X Chen, GQ Lu
Device and Materials Reliability, IEEE Transactions on 12 (1), 124-132, 2011
642011
Uniaxial ratcheting and fatigue behaviors of low-temperature sintered nano-scale silver paste at room and high temperatures
T Wang, G Chen, Y Wang, X Chen, G Lu
Materials Science and Engineering: A 527 (24-25), 6714-6722, 2010
532010
Thermo-viscoplastic modeling incorporating dynamic strain aging effect on the uniaxial behavior of Z2CND18. 12N stainless steel
D Yu, X Chen, W Yu, G Chen
International Journal of Plasticity, 2012
502012
Modified Anand constitutive model for lead-free solder Sn-3.5 Ag
X Chen, G Chen, M Sakane
Thermal and Thermomechanical Phenomena in Electronic Systems, 2004. ITHERM …, 2004
492004
Simplification of low-temperature sintering nanosilver for power electronics packaging
Y Mei, G Chen, Y Cao, X Li, D Han, X Chen
Journal of electronic materials 42 (6), 1209-1218, 2013
482013
Creep properties of low-temperature sintered nano-silver lap shear joints
X Li, G Chen, L Wang, YH Mei, X Chen, GQ Lu
Materials Science and Engineering: A 579, 108-113, 2013
472013
High-Temperature Creep Behavior of Low-Temperature-Sintered Nano-Silver Paste Films
G Chen, XH Sun, P Nie, YH Mei, GQ Lu, X Chen
Journal of Electronic Materials 41 (4), 782-790, 2012
412012
Ratcheting behavior of pressurized elbow pipe with local wall thinning
H Shi, G Chen, Y Wang, X Chen
International Journal of Pressure Vessels and Piping 102, 14-23, 2013
402013
Effect of joint sizes of low-temperature sintered nano-silver on thermal residual curvature of sandwiched assembly
Y Mei, G Chen, L Guo-Quan, X Chen
International Journal of Adhesion and Adhesives 35, 88-93, 2012
402012
Effects of pre-strain on uniaxial ratcheting and fatigue failure of Z2CN18. 10 austenitic stainless steel
Y Wang, D Yu, G Chen, X Chen
International Journal of Fatigue 52, 106-113, 2013
382013
Uniaxial ratcheting behavior of Zircaloy-4 tubes at room temperature
M Wen, H Li, D Yu, G Chen, X Chen
Materials & Design 46, 426-434, 2013
382013
Rapid sintering nanosilver joint by pulse current for power electronics packaging
Y Mei, Y Cao, G Chen, X Li, GQ Lu, X Chen
IEEE Transactions on Device and Materials Reliability 13 (1), 258-265, 2013
362013
Pressure-Assisted Low-Temperature Sintering of Nanosilver Paste for 5✕ 5-mm˛ Chip Attachment
G Chen, Y Cao, Y Mei, D Han, GQ Lu
IEEE, 0
35
The system can't perform the operation now. Try again later.
Articles 1–20