| Effect of annealing temperature on microstructures and mechanical properties of a 5083 Al alloy deformed at cryogenic temperature YB Lee, DH Shin, KT Park, WJ Nam Scripta materialia 51 (4), 355-359, 2004 | 282 | 2004 |
| Effect of interlamellar spacing on cementite dissolution during wire drawing of pearlitic steel wires WJ Nam, CM Bae, SJ Oh, SJ Kwon Scripta Materialia 42 (5), 457-463, 2000 | 232 | 2000 |
| Void initiation and microstructural changes during wire drawing of pearlitic steels WJ Nam, CM Bae Materials Science and Engineering: A 203 (1-2), 278-285, 1995 | 111 | 1995 |
| Effects of alloy additions and tempering temperature on the sag resistance of Si–Cr spring steels WJ Nam, CS Lee, DY Ban Materials Science and Engineering: A 289 (1-2), 8-17, 2000 | 94 | 2000 |
| Microstructural evolution and mechanical properties of low alloy steel tempered by induction heating ST Ahn, DS Kim, WJ Nam Journal of Materials Processing Technology 160 (1), 54-58, 2005 | 78 | 2005 |
| Mechanical properties of ultrafine grained 5052 Al alloy produced by accumulative roll-bonding and cryogenic rolling HR Song, YS Kim, WJ Nam Metals and Materials International 12, 7-12, 2006 | 75 | 2006 |
| Enhancement of high strain rate superplastic elongation of a modified 5154 Al by subsequent rolling after equal channel angular pressing KT Park, HJ Lee, CS Lee, WJ Nam, DH Shin Scripta materialia 51 (6), 479-483, 2004 | 71 | 2004 |
| Microstructural influence on fatigue properties of a high-strength spring steel CS Lee, KA Lee, DM Li, SJ Yoo, WJ Nam Materials Science and Engineering: A 241 (1-2), 30-37, 1998 | 66 | 1998 |
| Effect of carbon content on mechanical properties of fully pearlitic steels CM Bae, CS Lee, WJ Nam Materials science and technology 18 (11), 1317-1321, 2002 | 64 | 2002 |
| Diffusion barrier and electrical characteristics of a self-aligned MgO layer obtained from a Cu (Mg) alloy film WH Lee, HL Cho, BS Cho, JY Kim, WJ Nam, YS Kim, WG Jung, H Kwon, ... Applied Physics Letters 77 (14), 2192-2194, 2000 | 61 | 2000 |
| The evolution of microstructure and mechanical properties of a 5052 aluminium alloy by the application of cryogenic rolling and warm rolling UG Gang, SH Lee, WJ Nam Materials transactions 50 (1), 82-86, 2009 | 58 | 2009 |
| Coarsening behavior of cementite particles at a subcritical temperature in a medium carbon steel WJ Nam, CM Bae Scripta Materialia 41 (3), 313-318, 1999 | 56 | 1999 |
| Effect of Si on mechanical properties of low alloy steels WJ Nam, HC Choi Materials science and technology 15 (5), 527-530, 1999 | 56 | 1999 |
| An improvement on prediction of fatigue crack growth from low cycle fatigue properties DM Li, WJ Nam, CS Lee Engineering Fracture Mechanics 60 (4), 397-406, 1998 | 56 | 1998 |
| Effects of heat treatment on the surface of a die steel STD11 machined by W-EDM KK Choi, WJ Nam, YS Lee Journal of materials processing technology 201 (1-3), 580-584, 2008 | 55 | 2008 |
| Effect of carbon content on the Hall-Petch parameter in cold drawn pearlitic steel wires WJ Nam, CM Bae, CS Lee Journal of materials science 37, 2243-2249, 2002 | 52 | 2002 |
| Effects of post-deformation annealing conditions on the behavior of lamellar cementite and the occurrence of delamination in cold drawn steel wires JW Lee, JC Lee, YS Lee, KT Park, WJ Nam Journal of Materials Processing Technology 209 (12-13), 5300-5304, 2009 | 46 | 2009 |
| The improvement of strength and ductility in ultra-fine grained 5052 Al alloy by cryogenic-and warm-rolling UG Kang, JC Lee, SW Jeong, WJ Nam Journal of materials science 45, 4739-4744, 2010 | 44 | 2010 |
| Effects of silicon, nickel, and vanadium on impact toughness in spring steels WJ Nam, HC Choi Materials science and technology 13 (7), 568-574, 1997 | 43 | 1997 |
| Effects of alloying elements on microstructural evolution and mechanical properties of induction quenched-and-tempered steels WJ Nam, DS Kim, ST Ahn Journal of materials science 38, 3611-3617, 2003 | 42 | 2003 |
