| The effect of temperature on the evolution of eutectic carbides and M7C3→ M23C6 carbides reaction in the rapidly solidified Fe-Cr-C alloy K Wieczerzak, P Bala, R Dziurka, T Tokarski, G Cios, T Koziel, L Gondek Journal of Alloys and Compounds 698, 673-684, 2017 | 147 | 2017 |
| Formation of eutectic carbides in Fe–Cr–Mo–C alloy during non-equilibrium crystallization K Wieczerzak, P Bala, M Stepien, G Cios, T Koziel Materials & design 94, 61-68, 2016 | 82 | 2016 |
| The investigation of strain-induced martensite reverse transformation in AISI 304 austenitic stainless steel G Cios, T Tokarski, A Żywczak, R Dziurka, M Stępień, Ł Gondek, ... Metallurgical and Materials Transactions A 48, 4999-5008, 2017 | 69 | 2017 |
| The characterization of cast Fe-Cr-C alloy K Wieczerzak, P Bała, M Stępień, G Cios, T Kozieł Archives of Metallurgy and Materials 60, 2015 | 32 | 2015 |
| A novel high-strength Zn-3Ag-0.5 Mg alloy processed by hot extrusion, cold rolling, or high-pressure torsion M Wątroba, W Bednarczyk, J Kawałko, S Lech, K Wieczerzak, ... Metallurgical and Materials Transactions A 51, 3335-3348, 2020 | 30 | 2020 |
| An in situ and ex situ study of χ phase formation in a hypoeutectic Fe-based hardfacing alloy K Wieczerzak, J Michler, JM Wheeler, S Lech, R Chulist, J Czub, A Hoser, ... Materials & Design 188, 108438, 2020 | 17 | 2020 |
| Magnetic detection of chromium depleted regions in metastable Fe-Cr-C alloy K Wieczerzak, A Żywczak, J Kanak, P Bała Materials Characterization 132, 293-302, 2017 | 17 | 2017 |
| The influence of cooling rate during crystallization on the effective partitioning coefficient in high-entropy alloys from Al-Ti-Co-Ni-Fe system K Górecki, P Bala, G Cios, T Koziel, M Stępień, K Wieczerzak Metallurgical and Materials Transactions A 47, 3257-3262, 2016 | 16 | 2016 |
| Practical aspects of focused ion beam time-of-flight secondary ion mass spectrometry analysis enhanced by fluorine gas coinjection K Wieczerzak, A Priebe, I Utke, J Michler Chemistry of Materials 33 (5), 1581-1593, 2021 | 12 | 2021 |
| The γ′-Ni3 (Al, Ta) phase triggered strengthening of the Ni-Ta-Al-Cr-C coating layer, deposited on austenitic stainless steel K Wieczerzak, M Watroba, W Bednarczyk, M Madej, M Marzec, T Tokarski, ... Materials Characterization 129, 367-377, 2017 | 12 | 2017 |
| Microstructural and microchemical characterization of Ni-Ta-Al-Cr-C coating layer on austenitic stainless steel AISI 310 K Wieczerzak, P Bala, M Stepien, G Cios Surface and Coatings Technology 280, 110-121, 2015 | 11 | 2015 |
| Hypoeutectic Fe-Cr-Ni-Mo-C alloys additionally strengthened by the Frank-Kasper phases–Design by means of the CALPHAD approach K Wieczerzak, P Bała Calphad 64, 248-257, 2019 | 10 | 2019 |
| From pulsed-DCMS and HiPIMS to microwave plasma-assisted sputtering: Their influence on the properties of diamond-like carbon films C Hain, D Brown, A Welsh, K Wieczerzak, R Weiss, J Michler, ... Surface and Coatings Technology 432, 127928, 2022 | 8 | 2022 |
| Determination of critical resolved shear stresses associated with< a> slips in pure Zn and Zn-Ag alloys via micro-pillar compression W Bednarczyk, M Wątroba, M Jain, K Mech, P Bazarnik, P Bała, J Michler, ... Materials & Design 229, 111897, 2023 | 7 | 2023 |
| Evolution of microstructure and mechanical properties of ATI 718Plus® superalloy after graded solution treatment S Lech, AM Wusatowska-Sarnek, K Wieczerzak, A Kruk Metallurgical and Materials Transactions A 54 (5), 2011-2021, 2023 | 7 | 2023 |
| Mechanical properties and thermal stability of thin film metallic glass compared to bulk metallic glass from ambient to elevated temperatures M Jain, A Sharma, K Pajor, K Wieczerzak, NM della Ventura, X Maeder, ... Journal of Alloys and Compounds 960, 170728, 2023 | 6 | 2023 |
| Influence of HiPIMS pulse widths on the deposition behaviour and properties of CuAgZr compositionally graded films L Lapeyre, K Wieczerzak, C Hain, J Metzger, A Sharma, A Bensaoula, ... Surface and Coatings Technology 450, 129002, 2022 | 6 | 2022 |
| Microstructural response on nickel addition in rapidly solidified∼ Fe-25Cr-xNi-5Mo-0.8 C [x= 0, 6, 11, 15, 21 wt.%] hardfacing alloys K Wieczerzak, K Pajor, K Górecki, R Chulist, P Bała Journal of Alloys and Compounds 787, 186-195, 2019 | 6 | 2019 |
| Ultrastrong nanocrystalline binary alloys discovered via high-throughput screening of the CoCr system K Wieczerzak, O Nowicka, S Michalski, TEJ Edwards, M Jain, T Xie, ... Materials & Design 205, 109710, 2021 | 5 | 2021 |
| Crystallography and morphology of chromium rich eutectic carbides in an as-cast Fe-Cr-C alloy crystallized in non-equilibrium conditions K Wieczerzak, P Bała, T Tokarski, M Gajewska Acta Physica Polonica A 130 (4), 1007-1009, 2016 | 5 | 2016 |
Piotr BałaProfessor of Materials Science, AGH University of KrakowVerified email at agh.edu.pl
