|Effects of ausforming temperature on bainite transformation, microstructure and variant selection in nanobainite steel|
W Gong, Y Tomota, Y Adachi, AM Paradowska, JF Kelleher, SY Zhang
Acta Materialia 61 (11), 4142-4154, 2013
|Effect of prior martensite on bainite transformation in nanobainite steel|
W Gong, Y Tomota, S Harjo, YH Su, K Aizawa
Acta Materialia 85, 243-249, 2015
|Effect of ausforming on nanobainite steel|
W Gong, Y Tomota, MS Koo, Y Adachi
Scripta Materialia 63 (8), 819-822, 2010
|Martensite phase stress and the strengthening mechanism in TRIP steel by neutron diffraction|
S Harjo, N Tsuchida, J Abe, W Gong
Scientific reports 7 (1), 1-11, 2017
|Materials and life science experimental facility (MLF) at the Japan proton accelerator research complex II: neutron scattering instruments|
K Nakajima, Y Kawakita, S Itoh, J Abe, K Aizawa, H Aoki, H Endo, M Fujita, ...
Quantum Beam Science 1 (3), 9, 2017
|Study of tempering behavior of lath martensite using in situ neutron diffraction|
ZM Shi, W Gong, Y Tomota, S Harjo, J Li, B Chi, J Pu
Materials Characterization 107, 29-32, 2015
|Work Hardening, Dislocation Structure, and Load Partitioning in Lath Martensite Determined by In Situ Neutron Diffraction Line Profile Analysis|
S Harjo, T Kawasaki, Y Tomota, W Gong, K Aizawa, G Tichy, Z Shi, ...
Metallurgical and Materials Transactions A 48 (9), 4080-4092, 2017
|Development of a cryogenic load frame for the neutron diffractometer at Takumi in Japan Proton Accelerator Research Complex|
X Jin, T Nakamoto, S Harjo, T Hemmi, T Umeno, T Ogitsu, A Yamamoto, ...
Review of Scientific Instruments 84 (6), 063106, 2013
|High stereographic resolution texture and residual stress evaluation using time-of-flight neutron diffraction|
PG Xu, S Harjo, M Ojima, H Suzuki, T Ito, W Gong, SC Vogel, J Inoue, ...
Journal of applied crystallography 51 (3), 746-760, 2018
|In situ observations of transformation behavior upon heating for a 1.5 Mn-1.5 Si-0.2 C steel-comparison between neutron diffraction, XRD, EBSD and dilatometry|
Y Tomota, N Sekido, S Harjo, T Kawasaki, W Gong, A Taniyama
ISIJ International 57 (12), 2237-2244, 2017
|Reverse austenite transformation behavior in a tempered martensite low-alloy steel studied using in situ neutron diffraction|
Y Tomota, W Gong, S Harjo, T Shinozaki
Scripta Materialia 133, 79-82, 2017
|Nature of dynamic ferrite transformation revealed by in-situ neutron diffraction analysis during thermomechanical processing|
A Shibata, Y Takeda, N Park, L Zhao, S Harjo, T Kawasaki, W Gong, ...
Scripta Materialia 165, 44-49, 2019
|Dislocation densities and intergranular stresses of plastically deformed austenitic steels|
Y Tomota, M Ojima, S Harjo, W Gong, S Sato, T Ungár
Materials Science and Engineering: A 743, 32-39, 2019
|Deformation behavior of as-cast and as-extruded Mg97Zn1Y2 alloys during compression, as tracked by in situ neutron diffraction|
W Gong, K Aizawa, S Harjo, R Zheng, T Kawasaki, J Abe, T Kamiyama, ...
International Journal of Plasticity 111, 288-306, 2018
|Structure refinement of sub-cubic-mm volume sample at high pressures by pulsed neutron powder diffraction: application to brucite in an opposed anvil cell|
T Okuchi, N Tomioka, N Purevjav, J Abe, S Harjo, W Gong
High Pressure Research 34 (2), 273-280, 2014
|Deformation behavior of an austenitic steel by neutron diffraction|
S Harjo, J Abe, K Aizawa, W Gong, T Iwahashi
Proceedings of the 12th Asia Pacific Physics Conference (APPC12), 014017, 2014
|Change of deformation mechanisms leading to high strength and large ductility in Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained microstructures|
R Zheng, T Bhattacharjee, S Gao, W Gong, A Shibata, T Sasaki, K Hono, ...
Scientific reports 9 (1), 1-14, 2019
|In situ neutron diffraction study on ferrite and pearlite transformations for a 1.5 Mn-1.5 Si-0.2 C steel|
Y Tomota, YX Wang, T Ohmura, N Sekido, S Harjo, T Kawasaki, W Gong, ...
ISIJ International 58 (11), 2125-2132, 2018
|In-situ neutron diffraction during tension-compression cyclic deformation of a pearlite steel|
Y Wang, Y Tomota, S Harjo, W Gong, T Ohmura
Materials Science and Engineering: A 676, 522-530, 2016
|Dislocation characteristics in lath martensitic steel by neutron diffraction|
S Harjo, T Kawasaki, W Gong, K Aizawa
J. Phys. Conf. Ser 476, 1-7, 2016